How to conduct withstand voltage test on a 6kV cable using a variable frequency series AC Resonant T

　　How to conduct withstand voltage test on a 6kV cable using a variable frequency series AC Resonant Test System: 　　1.Connect the 6kV cable to the high-voltage output port of the variable frequency series AC Resonant Test System.

　　2.Set the frequency and voltage parameters of the variable frequency series AC Resonant Test System to meet the withstand voltage test requirements of the 6kV cable.

　　3.Turn on the power of the variable frequency series AC Resonant Test System,gradually increase the voltage to the set value,and observe if any abnormal situations occur with the 6kV cable.

　　4.Maintain the set voltage for a period of time,check if the 6kV cable can operate normally without leakage or breakdown.

　　5.After the withstand voltage test,gradually decrease the voltage to zero,and disconnect the cable from the test device.

　　6.Inspect the 6kV cable for any damage or anomalies to ensure safe use.

　　7.Record the results and data of the withstand voltage test for future reference.