How do you measure primary current with Primary Current Injection Test System

　　To measure primary current with a Primary Current Injection Test System,follow these steps: 　　1.Setup:Connect the test system to the primary side of the equipment you want to test.Ensure that all connections are secure and that the test system is properly configured for the test.

　　2.Set the Current Level:Set the desired primary current level on the test system.This is the current that will be injected into the primary side of the equipment.

　　3.Injection:Activate the test system to inject the primary current into the equipment.The test system will supply the specified current level for a specific duration.

　　4.Measurement:Use the measurement instruments provided in the test system to measure the primary current.This could involve using ammeters or other current measurement devices included in the test system.

　　5.Recording:Record the measured primary current values for analysis and documentation.Compare these values with the expected current levels to determine the health and performance of the equipment under test.

　　6.Analysis:Analyze the measured current values to assess the performance and condition of the equipment.Deviations from expected values may indicate faults or issues that need to be addressed.

　　7.Documentation:Document the test results,including the measured primary current values,any deviations from expected values,and any observations or recommendations for further action.

　　It's important to follow the manufacturer's instructions and safety guidelines when conducting primary current injection tests to ensure accurate measurements and safe testing procedures.